Model LIFT BALANCE

LIFT BALANCE Independent Two-Car Parking Lift System

Product Description

The LIFT BALANCE is an advanced two-car parking lift system designed to maximize parking capacity while providing independent and safe vehicle access. Unlike traditional stacked parking lifts, the LIFT BALANCE allows the upper vehicle to be retrieved without moving the lower one, making it ideal for both private garages and public parking facilities.

No-Pit Installation – Fast and Cost-Efficient

One of the key advantages of the LIFT BALANCE system is its no-pit installation design. The lift is mounted directly on a reinforced concrete base, flush with the parking floor, eliminating the need for excavation or recessed foundations. This significantly reduces installation time and costs, requiring only standard electrical connections.

Two Configurations: Private and Public

Private Garage Version

Offers flexible parking options
A lower position can accommodate motorcycles or bicycles
Perfect for villas, premium garages, and residential applications

Public Parking Version

Automated parking system for high-traffic environments
Vehicles are positioned automatically into the lower space
Ensures precise positioning, increased safety, and consistent operation

Fast Operation with Side-Lifting Technology

The LIFT BALANCE system employs a side-lifting mechanism, enabling exceptionally fast vehicle access. Lowering a car to the bottom parking position takes ≤ 18 seconds, making it ideal for commercial garages, offices, and public parking facilities.

Key Advantages

Independent access to both parking levels
No-pit, surface-mounted installation
Fast operation (≤ 18 seconds)
Side-lifting mechanism for efficient workflow
4.5° tilt for increased safety
Suitable for private and public parking environments
Optimized for modern urban parking systems

Model LIFT BALANCE

RESIDENTIAL GARAGE EDITION

Lower position in profile projection

Lower position in the plane

Enhanced Safety with Controlled Vehicle Tilt

During lifting and lowering, the vehicle is tilted 4.5 degrees toward the parking bay. This controlled tilt significantly increases operational safety by improving clearance and reducing the risk of contact with the vehicle parked below. The design minimizes collision risk and protects vehicles throughout the entire parking cycle.

SPECIFICATIONS

Electrical Required

380 or 220 VAC 50/60 Hz.

Control Power

24 VAC

Power Pack

2.x4 kw hydraulic power pack

Capacity

243t

Emergency stop button
Upper limit switch
Lifting speed -0.17m/sec
Lowering speed 0.2m/sec
Electrical security class IP55
Automatic mechanical lock in the lifted position
Hydrosystem electromagnetic safety valve
Remote control

DISCLAIMER

The company Hidrotiltai performs the design of this equipment including kinetostatic, strength, stability calculations, and construction, therefore we provide CE marking ourselves. We follow relevant EU machinery directives such as EN-1570-A2 when designing. We offer production to companies that have implemented the ISO 90001 standard. Hydrobridges" does not promise, guarantee or warrant that our products comply with any state, county, federal or international mandated permit, license, code, standard, certificate or any other mandate other than EN-1570-A2.

Buyer assumes full responsibility for any state, county, federal, or international mandated permit, license, code, standard, certificate, or any other required authorization related to the installation and operation of any HIdrotiltai product. Hydrobridges shall not be liable for any taxes, fines, liens, or other charges imposed on the Buyer in connection with any special or regional structural, seismic, or any other building code and/or code, or any other state, county, federal, or international authorized permit, license, code, standard, certificate or other authority, law, rule, regulation or directive issued by any other agency, government, administration or corporations with state, county, federal or international powers.

Page updated

Google Sites

Report abuse