ModeL TONAR

Description

The TONAR model is a car dock-type two-platform parking lift. The platforms are mounted one above the other. It is a lift with an original and ergonomic design. The upper platform is attached to the lower one with only two uprights, which do not prevent getting out of the car parked on the lower platform. Since there are only two supports holding the upper platform, it is more convenient to park the car on the lower platform than when there are four supports.

These lifts are adapted and can be installed in private residences, public office parking spaces, hotels, and the like.

HYDRAULIC CYLINDER SPRING AND HYDRAULIC SAFETY LOCK

The springs installed in the hydraulic cylinders ensure a gentle descent of the platform and a smooth start of the lift.

Electromagnetic shut-off valves are used as safety elements

and are installed directly on the hydraulic cylinder landing water main. Since a pair of hydraulic cylinders operating in parallel are installed to increase safety, hydraulic oil flow dividers are installed to synchronize their operation regardless of the load.

PLATFORM SEALING

Gaskets are placed at the junction of the platform covered with the sideboards so that even small amounts of moisture do not fall on the car parked below.

DRIVE RAMP

The drive ramp has a widened mouth, which helps to drive onto the platform more ergonomically.

UPPER PLATFORM NIGHT LITHING

SPECIFICATIONS

Electrical Required

380 or 220 VAC 50/60 Hz.

Control Power

24 VAC

Power Pack

2.x4 kw hydraulic power pack

Capacity

243t

Emergency stop button
Upper limit switch
Lifting speed -0.17m/sec
Lowering speed 0.2m/sec
Electrical security class IP55
Automatic mechanical lock in the lifted position
Hydrosystem electromagnetic safety valve
Remote control

DISCLAIMER

The company Hidrotiltai performs the design of this equipment including kinetostatic, strength, stability calculations, and construction, therefore we provide CE marking ourselves. We follow relevant EU machinery directives such as EN-1570-A2 when designing. We offer production to companies that have implemented the ISO 90001 standard. Hydrobridges" does not promise, guarantee or warrant that our products comply with any state, county, federal or international mandated permit, license, code, standard, certificate or any other mandate other than EN-1570-A2.

Buyer assumes full responsibility for any state, county, federal, or international mandated permit, license, code, standard, certificate, or any other required authorization related to the installation and operation of any HIdrotiltai product. Hydrobridges shall not be liable for any taxes, fines, liens, or other charges imposed on the Buyer in connection with any special or regional structural, seismic, or any other building code and/or code, or any other state, county, federal, or international authorized permit, license, code, standard, certificate or other authority, law, rule, regulation or directive issued by any other agency, government, administration or corporations with state, county, federal or international powers.