Model UBOX

UBOX Independent Two-Post Parking Lift

Product Description

The UBOX Two-Post Parking Lift is an independent hydraulic system designed for efficient vertical parking. Unlike conventional lifts, the UBOX allows the upper vehicle to be raised or lowered without moving the lower vehicle, providing maximum flexibility and convenience.

This model requires a prepared installation site. A pit approximately 1.8 meters deep must be concreted, enabling the parking floor to ceiling height to be reduced to around 3.2 meters. This design makes the lift suitable for spaces with lower ceilings while maintaining full functionality.

Ideal for Dynamic and Active Environments

The UBOX lift is particularly well-suited for locations that demand fast, independent vehicle access, such as:

Student dormitories
Sports complexes
Entertainment facilities

Its versatile, dynamically operated system provides quick and reliable vertical parking, appealing to young and active users who value convenience and efficiency.

Key Advantages

Independent hydraulic operation of upper and lower vehicles
Compact installation with a pit requirement
Ideal for lower ceiling heights (~3.2m)
Suitable for dynamic, high-usage environments
Efficient, fast, and flexible vertical parking

METRICAL SCHEME

Parklift features

EXPANDED PLATFORM

This type of parking lift has wider platforms to make it convenient and safe to get in or out of a parked car.

DISTANCE BETWEEN PLATFORMS

The distance between the platforms is kept optimal to make it safe and comfortable for a person of average height to get into the car.

Scheme of the preparation of the place of installation of the parkift model UBOX

Safety

Hydraulic shut-off valves are installed to protect against any damage to the hydraulic main.

Longevity

All kinematic joints of the device are equipped with lubrication points. The kinematic units are connected through lubricating bearings.

Compact

The hydropack and control unit are mounted directly on the parking platform.

SPECIFICATIONS

Electrical Required

380 or 220 VAC 50/60 Hz.

Control Power

24 VAC

Power Pack

2.x4 kw hydraulic power pack

Capacity

243t

Emergency stop button
Upper limit switch
Lifting speed -0.17m/sec
Lowering speed 0.2m/sec
Electrical security class IP55
Automatic mechanical lock in the lifted position
Hydrosystem electromagnetic safety valve
Remote control

DISCLAIMER

The company Hidrotiltai performs the design of this equipment including kinetostatic, strength, stability calculations, and construction, therefore we provide CE marking ourselves. We follow relevant EU machinery directives such as EN-1570-A2 when designing. We offer production to companies that have implemented the ISO 90001 standard. Hydrobridges" does not promise, guarantee or warrant that our products comply with any state, county, federal or international mandated permit, license, code, standard, certificate or any other mandate other than EN-1570-A2.

Buyer assumes full responsibility for any state, county, federal, or international mandated permit, license, code, standard, certificate, or any other required authorization related to the installation and operation of any HIdrotiltai product. Hydrobridges shall not be liable for any taxes, fines, liens, or other charges imposed on the Buyer in connection with any special or regional structural, seismic, or any other building code and/or code, or any other state, county, federal, or international authorized permit, license, code, standard, certificate or other authority, law, rule, regulation or directive issued by any other agency, government, administration or corporations with state, county, federal or international powers.

Page updated

Google Sites

Report abuse