Embedded Files
HYDRAULIC CARGO LIFTS
Hydraulic (cargo) hoists are very versatile handling equipment. They can be used when the floor of a warehouse or other room is overlapping and does not match the access level. The area of use of the hydraulic hoists is further expanded when the lift is equipped with various platforms, rolgang (rolgang can be self-propelled or with manual drive). Lifting scissors can be doubled horizontally or vertically, increasing lifting capacity to 30t or lifting height (up to 5.8m). One of the major advantages of this construction is that the entire structure is hidden in the pond when the lift is lowered.
An important advantage of this type of hoist is that the largest forces acting on the hoist units arise in the lower lift position, i.e. lift from start to rise. For this reason, the safety of the hoists is greatly increased. In addition, safety is enhanced by the use of various auxiliary tools such as foot pressure protection, hydromassage protection, service locks (service locks. Jpg), and others. Our scissor lifts are designed in accordance with the European Standard EN-1570 + A2 machine directive (lifting table) instructions and marked with a CE quality certificate.
ST-TYPE CARGO LIFTS
ST-TYPE CARGO LIFTS
Single tandem scissor lifts are the most common type. They are widely used in warehouses, near shops, for lifting cars. Models with a rotating, tilting, or motorized roller platform are used in industry.
Single tandem scissor lifts are the most common type. They are widely used in warehouses, near shops, for lifting cars. Models with a rotating, tilting, or motorized roller platform are used in industry.
VT-TYPE CARGO LIFTS
VT-TYPE CARGO LIFTS
The type of elevator is designed to lift loads higher.
The type of elevator is designed to lift loads higher.
HT-TYPE CARGO LIFTS
HT-TYPE CARGO LIFTS
These are high-capacity elevators.
These are high-capacity elevators.
Page updated
Google Sites
Report abuse