Model LUPREC

Description

The LUPREC model is the most ergonomic two-level car parking model. After lifting the car to the upper level, there are no elements below that interfere with parking and getting out of the car or just walking. Another feature of the LUPREC model is that the entire lifting and hydraulic system is installed directly in the lifting platform structure. Therefore, the parking lift of this model looks stylish, because the appearance is not spoiled by hydraulic cylinders and other elements.

As an option, you can choose a horizontal tilt of the platform in the lower position of -2 degrees and in the upper position of +3 degrees. This allows for a smoother approach to the platform in the lower position, and the raised rear part of the platform in the upper position allows for parking an SUV in the lower position.

This is made possible by a two-chamber system of one hydraulic cylinder. A different flow of hydraulic oil is supplied to the rear and front chambers of the hydraulic cylinder, which, through a pre-adjusted flow divider, turns the lifting platform at a different angle in the lower and upper positions.

HYDRAULIC CYLINDER AND LIFTING SYSTEM

Lifting and hydraulic system is installed directly in the lifting platform structure. Therefore, the parking lift of this model looks stylish, because the appearance is not spoiled by hydraulic cylinders and other elements.

DOMUS APPLICATION

LUPREC lifts can be perfectly adapted to residences. The first level would be used for daily parking. The second level can be used to store less frequently used equipment (trailers, skiffs, jet skis, ATVs, snowmobiles).

STORAGE APPLICATION

LUPREC lifts can be perfectly applied in vehicle storage. An example would be the Lithuanian company NORDSPACE.

ADAPTATION TO PUBLIC SPACES

The LUPREC model is unique in that up to 5 cars can be lifted to the upper position, completely freeing up the lower one. This means that you can freely park, store, or otherwise use the free space in the lower one. The LUPREC model provides this!

SPECIFICATIONS

Electrical Required

380 or 220 VAC 50/60 Hz.

Control Power

24 VAC

Power Pack

2.x4 kw hydraulic power pack

Capacity

243t

Emergency stop button
Upper limit switch
Lifting speed -0.17m/sec
Lowering speed 0.2m/sec
Electrical security class IP55
Automatic mechanical lock in the lifted position
Hydrosystem electromagnetic safety valve
Remote control

DISCLAIMER

The company Hidrotiltai performs the design of this equipment including kinetostatic, strength, stability calculations, and construction, therefore we provide CE marking ourselves. We follow relevant EU machinery directives such as EN-1570-A2 when designing. We offer production to companies that have implemented the ISO 90001 standard. Hydrobridges" does not promise, guarantee or warrant that our products comply with any state, county, federal or international mandated permit, license, code, standard, certificate or any other mandate other than EN-1570-A2.

Buyer assumes full responsibility for any state, county, federal, or international mandated permit, license, code, standard, certificate, or any other required authorization related to the installation and operation of any HIdrotiltai product. Hydrobridges shall not be liable for any taxes, fines, liens, or other charges imposed on the Buyer in connection with any special or regional structural, seismic, or any other building code and/or code, or any other state, county, federal, or international authorized permit, license, code, standard, certificate or other authority, law, rule, regulation or directive issued by any other agency, government, administration or corporations with state, county, federal or international powers.