Model HL0.4_1.2x2_1.3

DESCRIPTION

This type of hydraulic jib lift is designed to lift light (up to 500kg) loads to warehouses or retail outlets. It does not require a pit. The lift is mounted directly to the vertical wall of the ramp.

Model HL0.4_1.2x2_1.3

· The lift is adapted to lift cars.

Lifting platform dimensions:

Width (m) Length (m)

L=2 B=1.2

Movement Speed Lifting (m/s) Down (m/s)

0.2 0.25

Lifting height (m) - 4.0

____________

Elevator installed at Vilnius Airport

The elevator lifting system is installed directly on the lifting platform.

The device is made of Scandinavian concern ASVA steel S355 grade steel sheets and beams. The structure is painted with a wet method. Control is electric - hydraulic. Product weight (gross) 0.38t. Warranty - 2 years.

MODEL: Model HL0.4_1.2x2_1.3 tested according to standard LST-EN -1526. Lifting capacity 0.4t.

DIMENSIONS:

Width (B): 1200mm

Length (L): 2000mm

Height (h): 100 mm

Stroke (H-h): 1300 mm

PLATFORM: made of laser-cut solid 4mm thick sheet with folded edges. Stiffening edges are formed from 4mm thick laser-cut and bent beams. Bearing mountings are made of 12 mm-thick plates.

FRAME: Made of laser-cut 5mm thick sheet. Frame rigidity is formed by folding the edges of the sheet.

COATING: The product is powder-coated.

WHEELS: 62 mm diameter and 0mm height wear-resistant Winkel (Germany).

HYDRO: Cylinders -2 units

Cylinder type - piston

Pump type - gear

Tank capacity - 5 liters

Lubricant - NESTE 46

Operating temperature - -30ºC - +50 ºC

SAFETY: "Zebra" type marking of moving parts.

Protection against damage to the hydraulic main.

DEVICE COLOR: